67 POWER SUPPLY 24VDC 15W X

This module is equipped with 16 digital channels that can be configured either as inputs or outputs. The inputs are designed for a sink circuit, and the outputs are designed for a source circuit.The node number switch for setting the X2X Link address is a unique feature. When modular machine configurations change, it is required, for example, to define certain module groups at a fixed address that is independent of the preceding modules in the line. All subsequent standard modules refer to this offset and use it automatically for addressing purposes.

X67 DIGITAL MIX 8X IN/OUT, NODE NR.

X67 DIGITAL MIX 16X IN/OUT, 24VDC, M8

The module is a digital input module with high integration density. The module is equipped with 16 inputs and M8 connectors.

X67 DIGITAL IN 1X8 24VDC 1MSEC

The module is equipped with 2 resolver connections as well as 2 digital inputs and outputs for each. It is possible to evaluate BRX and BRT resolvers using a configurable sine gain of 1 or 0.25.

X2X LINK CONNECTION CABLE, 0.25 M

POWER CONNECTION CABLE, 2 M

POWER CONNECTION CABLE, 1.5 M

PLK ATTACHMENT CABLE RJ45 TO M12, 15 M

M8 SENSOR CABLE, 5 M

M8 SENSOR CABLE, 2 M

PROFIBUS DP OPEN CABLE, 5 M

PROFIBUS DP ATTACHMENT CABLE, 5 M

PROFIBUS DP CONNECTION CABLE, 5 M

PROFIBUS DP CONNECTION CABLE, 2 M

M12 SENSOR CABLE, 15 M

M12 SENSOR CABLE, 2 M

The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler. Additional X2X Link I/O nodes (X67 modules or other modules based on X2X Link) can be connected using the integrated X2X Link connection. Mechanically, POWERLINK is connected via an IP67-rated standard D-coded M12 Ethernet connector.POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.