The module is equipped with 2 inputs for J, K, N, S, B and R thermocouple sensors. The module has an integrated terminal temperature compensation. This module is designed for X20 6-pin terminal blocks. If needed (e.g. for logistical reasons), the 12-pin terminal block can also be used.

The module is equipped with 4 inputs for PT100/PT1000 resistance temperature measurement.

The module is equipped with 6 inputs for J, K, N, S, B and R thermocouple sensors. The module has an integrated terminal temperature compensation.

The module is equipped with 4 inputs for PT100 4-line resistance temperature measurement.

X20 COMPACT-S BUS BASE, BASE FOR INTEGRATED RS232 INTERFACE, X20 CONNECTION, X20 LOCKING PLATES X20AC0SL1/X20AC0SR1 (LEFT AND RIGHT) INCLUDED

X20 COMPACT-S BUS BASE, BASE FOR INTEGRATED RS232 INTERFACE, 1 SLOT FOR X20 INTERFACE MODULES, X20 CONNECTION, X20 LOCKING PLATES X20AC0SL1/X20AC0SR1 (LEFT AND RIGHT) INCLUDED

X20 BUS CONTROLLER BASE

X20 BUS CONTROLLER BASE + 1 SLOT

X20 BUS CONTROLLER BASE + 2 SLOT

X20 BUS CONTROLLER CANOPEN

X20 BUS CONTROLLER POWERLINK

X20 BUS CONTROLLER MODBUS/TCP

EtherNet/IP is an Ethernet-based fieldbus. EtherNet/IP was developed by Allen-Bradley (Rockwell Automation) and later transferred to the Open DeviceNet Vendor Association (ODVA) as an open standard. In 1998, a working group at ControlNet International developed a procedure for setting the published Common Industrial Protocol to Ethernet. EtherNet/IP was published in March 2000 as an open industrial automation standard based on this procedure. This bus controller makes it possible to connect X2X Link I/O nodes to EtherNet/IP. The bus controller can be operated via interface module X20IF10D1-1 or by 3rd-party systems with EtherNet/IP scanner functionality.With multifunction modules, the bus controller supports only the default function model in the event of automatic configuration by the bus controller (see the respective module description). Automation Studio V4.3 or later can be used to easily create configuration files (e.g. EDS files, binary files). All other function models are also supported by transferring configuration data to the bus controller (e.g. using the scanner via a "configuration assembly"). Automation Studio can be downloaded at no cost from the B&R website (www.br-automation.com). The evaluation license is permitted to be used to create complete configurations for fieldbus bus controllers at no cost.

X20 BUS CONTROLLER, 1OPC UA ETHERNET INTERFACE, INTEGRATED 2- PORT SWITCH. 2XRJ45

PROFINET (Process Field Network) is an Industrial Ethernet protocol. It uses TCP/IP and is real-time capable. X20 modules or other modules based on X2X Link can be connected to the bus controller. Modular system configurations are optimally supported by PROFINET. Using the device description file (GSDML format), it is very easy to handle project configuration in the respective engineering tool from the manufacturer of the master device.

X20 BUS CONTR.POWERLINK EXTENDABLE

X20 BUS CONTROLLER POWERLINK, REDUNDANCY

X20 BUS MODULE WITH POWER BUS SEPERATION

X20 BUS MODULE WITH POWER BUS CONNECTION

X20 BUS 240V CODED, POWER BUS CONNECTION